bluelog Neo
bluelog Neo
Breadcrumbs

Power display

Last modified:

Depending on your plant setup, you can configure the power display for the following:

  • Cockpit: Real-time power flow diagram

  • External device: Data is displayed via an external device, such as a large display screen that visualizes the energy produced and the power of the system.

Configure the power display

Power display - Cockpit

  1. Navigate to Plant > Power display.

  2. Select the Data source you want to display:

    • Inverter sum (PV plant, only in Master mode): Sum of AC power of all master and slave bluelogs.

    • Inverter sum (bluelog): Sum of AC power of all inverters connected to the bluelog.

    • Meter: AC power of a connected meter: Select the meter.

  3. Enter the maximum feed-in of the plant under Full scale feed-in.

Power display - External device

  1. Select the Data source:

    1. Inverter sum (PV plant, only in Master mode): Sum of AC power of all master and slave bluelogs.

    2. Inverter sum (bluelog): Sum of AC power of all inverters connected to the bluelog.

  2. Pulses pro kWh: Enter a pulse constant such that the maximum pulse rate of 10 Hz is not exceeded.

  3. Digital output: Select available values (values that are not already assigned).