.png){kind=logo}
Advice on using this user manual
Last modified:
Purpose of this user manual
This manual is a key aid when it comes to ensuring proper operation of the device. It contains important information and safety notes to help you use the devices correctly, economically and in the intended manner. The manual helps to avoid dangers, to reduce repair costs and downtimes, and to increase the reliability and operating life of the devices. During installation, all the manuals for system modules and components must be taken into account. The user manual is continuously updated.
Target group and qualification
This manual is intended for persons who are responsible for planning the installation, installing, starting up, operating, and maintaining the blue’Log. The activities described in this document may only be carried out by qualified personnel. Qualified personnel must meet the following criteria:
Training in the installation and configuration of IT systems.
Training in hazards and risks when installing, repairing and operating electrical equipment and systems.
Training for the installation and commissioning of electrical equipment and systems.
Knowledge of the relevant laws, standards and guidelines.
Knowledge of and compliance with this document with all safety instructions.
Danger
Danger due to improper handling
The staff responsible for the installation, operation and maintenance of the system must have read and understood this user manual before the devices can be installed and used safely!
The manuals and documentation must be kept by the system and be available at all times.
meteocontrol GmbH accepts no liability for personal injury, damage to property, or system malfunctions and their consequences, insofar as these result from non-observance of this user manual.
Warranty and liability
The scope, period and form of the warranty are specified in the general terms and conditions of meteocontrol GmbH. Further information on warranty and liability can be found at www.meteocontrol.com.
meteocontrol rejects any liability for damage arising from the non-observance of the user manual. This applies, in particular, for damage from:
Unintended use
Faulty operation
Wrongly chosen materials and tools
Faulty or non-executed maintenance and repairs
In cases of control and regulation (“Power Control”), meteocontrol GmbH accepts no liability for events and occurrences outside of its control, such as:
The correctness of control commands given by an energy supply company or failure to implement control commands
Hardware and/or software faults on the part of the system operator
End-user switching processes
Any liability for damages caused by events and occurrences such as lost profits, grid instability, damage to parts of the customer’s system, for instance of an inverter, shall remain expressly excluded.