Skip to main content
Skip table of contents

Total outage alarms

In the case of a total outage, for example of the inverters, string combiner boxes, or the entire system, you can decide when VCOM will react with an alarm.

Total outage alarms.png

Total outage alarms

Target source calculation: See Simulation methods for smart alarms

Nominal power: The manufacturer's indication of the power output of the system under normal conditions.

Example

If a PV system has 100 kWp of power and you set the nominal power to 7.5%, the misproduction alarm is only triggered if the system exceeds 7,5 kW of power. 

Delay: If you configure a delay, e.g. 30 minutes, an alarm will only be triggered in case of persistent incidents. This helps to avoid alarms for deviations that only occur for a short time.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.