Skip to main content
Skip table of contents

Power performance index (PPI)

Chart

Power performance index chart

Power performance index chart

Basic info

Description

The power performance index describes the ratio between simulated and generated power. Ideally, the value should be as close to 100% as possible. The value is depicted over the course of one day. Simulated power is derived from the target performance ratio and the irradiation. Values are calculated starting at an irradiance of 50 W/m2.

Prerequisites

Target PR is configured under System configuration (wrench icon) > Calculations > Target PR.

Further details

All other parameters are fixed.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.