Skip to main content
Skip table of contents

Other devices

Under System configuration > Data sources > Other devices, you can see the additional external devices connected to your system, e.g. via a data logger. You may be able to edit the device designation depending on which data logger is installed. If you use a blue’Log, you must change the device name directly in the blue'Log web interface.

Other devices

Other devices

Item

Name

Details

1

Ident no.

Automatically assgined by VCOM. Read-only

2

UID

Device identifier during data import

3

Type

Type of sensor or status signal

4

Designation

Automatically assigned based on the information from the data logger. If using a blue’Log, you can change the name via the blue’Log web interface.

5

Replace device

Exchange device or status signal with a new one. This process will delete the old device and transfer its Ident key to the new device.

Example: You have exchanged a physical sensor on-site and now need to update VCOM as well.

6

Delete device

This function removes a device completely. This function should used with caution. If you have any questions, please contact Technical support.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.