SolarMax

Set up a SolarMax data logger

General tips

Have the data source (data logger, etc.) serial number on hand. When entering the serial number, pay attention to uppercase and lowercase letters and empty spaces.
The data source name can be freely selected. For recommendations, see our Naming guideline.
Set the same measuring interval for all data sources in the system to ensure charts are accurately displayed in VCOM. This is used to normalize uneven timestamps and aggregate smaller recorded intervals into larger ones.
To ensure that the data source measuring interval has been set correctly in VCOM, open an imported file in the Data logger overview portlet in VCOM and check the timestamps.
If possible, perform a connection test once you have completed the configuration in both VCOM and the data source.

Protocol	Email
File format	XML
Measuring interval	900 seconds
Email	solarmax@mail1.meteocontrol.de
Data import	Enter the e-mail address solarmax@mail1.meteocontrol.de on the Maxweb data logger.

Select Maxweb as the device type.
The serial number of the data logger must be added to 60000. This serial number must be entered in the portal.