Solar-Log

Set up a Solar-Log data logger

General tips

Have the data source (data logger, etc.) serial number on hand. When entering the serial number, pay attention to uppercase and lowercase letters and empty spaces.
The data source name can be freely selected. For recommendations, see our Naming guideline.
Set the same measuring interval for all data sources in the system to ensure charts are accurately displayed in VCOM. This is used to normalize uneven timestamps and aggregate smaller recorded intervals into larger ones.
To ensure that the data source measuring interval has been set correctly in VCOM, open an imported file in the Data logger overview portlet in VCOM and check the timestamps.
If possible, perform a connection test once you have completed the configuration in both VCOM and the data source.

Protocol	FTP
File format	Solar-Log & CSV
Measuring interval	Variable: 300 sec/5 min recommended
Server	ftp.sspcdn-a.net
Port	21
Serial number	Found on the data logger under Diagnosis > Support > General Solar-Log: location of serial number

Enter the FTP access data under Configuration > Internet > Export. Pay attention to upper and lower case.
Leave FTP Directory blank
Set the Data format to Solar-Log & CSV.
Solar-Log: export settings
Select the Start button to perform a connection test.
Ensure that the System date and time have been set correctly.