HUAWEI FusionSolar API

Set up a HUAWEI FusionSolar API

General tips

Have the data source (data logger, etc.) serial number on hand. When entering the serial number, pay attention to uppercase and lowercase letters and empty spaces.
The data source name can be freely selected. For recommendations, see our Naming guideline.
Set the same measuring interval for all data sources in the system to ensure charts are accurately displayed in VCOM. This is used to normalize uneven timestamps and aggregate smaller recorded intervals into larger ones.
To ensure that the data source measuring interval has been set correctly in VCOM, open an imported file in the Data logger overview portlet in VCOM and check the timestamps.
If possible, perform a connection test once you have completed the configuration in both VCOM and the data source.

Configuration details

Protocol	Pull via HTTPS
File format	JSON
Measuring interval	Variable: 300 sec/5 min recommended
Query interval	15 min
User name	Huawei FusionSolar user name
Password	Huawei FusionSolar password
Station code	Huawei FusionSolar station code

Configuration: API

Set up user for NorthBound (API) in the FusionSolar UI. Select System > Company Management > System > Northbound Management.
Identify the system codes. These will be equivalent to the system keys when configuring VCOM

Configuration: VCOM

In the VCOM system configuration, select Data sources > Data logger overview > select Huawei FusionSolar API.
Select Add.
Insert the Huawei User name, System code, and Station codes.
Select Save settings.